H-105FM/AM Machine printed high-density printing ink for cotton fabric

performance

Appearance: h-105fm is slightly microscopic yellow, h-105am is pure white

Features: smooth surface, quick thickness, tension, good elasticity, easy to operate, the surface is dry and not sticky.It is recommended to print the reverse overheat treatment.

1. Viscosity: 135000~145000cps;

2. Ionic: non-ionic;

3. Storage period: one year (normal temperature, sealed).

Apply

1. This product is mainly used for 3d printing of high-grade nylon cloth, milk silk, swimsuit cloth, sportswear, polyester cloth, knitted cotton cloth, cotton spandex fabric, etc. It has advantages of good thickness, soft feel, non-anti-adhesion, strong stereoscopic feeling and easy color mixing.

2, the product generally USES 80 mesh 120 mesh screen, according to the different patterns of the screen must be tight, this is quite critical;

3, the product is not easy to plug the net, when too thick you can add an appropriate amount of water slurry and stir evenly to dilute;

4, in order to ensure the printing effect, according to the thickness of the general need to print 5-8 times;

5. This product is easy to operate. It is generally recommended to directly use flat screen (ordinary screen version), without making thick screen;In the use of thick screen printing, printing after the first time to dry after the second printing;

6. After the natural drying for 72 hours, the temperature should be 150 degrees /15-30 seconds. When the temperature is too high, the fabric should be on the opposite side as far as possible.

7. If the fastness needs to be improved, 1% catalyst or crosslinking agent can be added when using.

8. Suitable for: handprint, oval printing machine, run-table printing machine, etc.