PU010A/C Nylon super flat machine printing thick plate pulp

 

This product is the company for the market printing three-dimensional effect printing requirements, with imported materials developed from the right Angle thick plate printing glue, solve

 

The printing pile of three-dimensional thick plate is not thick, the Angle is not straight and the printing times are too many.

 

First, performance: performance

 

Appearance: PU010C is slightly microscopic yellow, PU010A is pure white

 

Features: fast thickness, super flat, high adhesion, washable, good tension, easy to operate, oily primer varnish binding degree is very good, surface

 

Dry and non-stick;

 

1, viscosity: 12500~13000cps;

 

2, ionic: non-ionic;

 

3, storage period: half a year (room temperature, sealed).

 

2. Application: Apply

 

1. This product is mainly used for high-grade nylon cloth, swimsuit cloth, sportswear, polyester cloth, knitted cotton cloth, cotton spandex fabric and other three-dimensional thick plate

 

Printing, easy to mix color and other advantages.

 

2, this product generally uses 80 mesh 120 mesh mesh, according to the pattern of the different mesh must be taut, this is quite key;

 

3, this product is not easy to plug the net, too thick can be added to the appropriate amount of water slurry stirring evenly for dilution;

 

4, this product is easy to operate, it is generally recommended to directly use the flat screen (ordinary screen version), do not need to make thick plate; When using thick screen printing,

 

After the first printing, the second printing should be done after drying;

 

5. 2% of MLD-888 special crosslinker must be added when using

 

6, after 24 hours of natural air drying, then overtemperature 145 degrees /2-3 minutes;

 

7, suitable for: hand printing, elliptical printing machine printing, running table printing machine printing, etc.

 

This is a laboratory operating parameter, not a basis for quality commitment.