Products
- Printing ink for High Density series-Hand printing
- Printing ink for High Density series-Machine printing
- Printing ink for machine printing series
- Water-based printing ink
- Printing Material Auxiliaries series
- Printing ink for hand printing
- Dipping material for rope end webbing
Service hotline：
13827210351
current location：Home>>Products > Printing Material Auxiliaries series > text
3010C Wrinkle paste
This product is environmentally friendly non-pressing hot imitation embossing paste, super fastness, wash water, no molding, obvious post-printing wrinkling effect, washing water does not affect wrinkling effect, with embossing effect, smooth and non-stick surface, excellent printing performance, suitable for nylon, chemical fiber fabric, umbrella cloth, windbreaker cloth, down jacket, polyester, thin fabric, etc. Not suitable for cotton (waterproof fabrics above grade 3 adhesion is not good enough)
3010C Wrinkle paste
Content introduction
Performance: Performance
1. Appearance: 3010C is translucent paste
2. Main ingredients: special polyurethane copolymer;
3. Attributes; Water soluble;
4, PH value: 8.2~8.5;
5, ionic: non-ionic;
6, yellow resistance: 2.5~2.8
7, storage period: 6 months (room temperature, sealed);
Character: Character
This product is environmentally friendly non-pressing hot imitation embossing paste, super fastness, wash water, no molding, obvious post-printing wrinkling effect, washing water does not affect wrinkling effect, with embossing effect, smooth and non-stick surface, excellent printing performance, suitable for nylon, chemical fiber fabric, umbrella cloth, windbreaker cloth, down jacket, polyester, thin fabric, etc. Not suitable for cotton (waterproof fabrics above grade 3 adhesion is not good enough)
Application: Apply
1, the scope of application: manual plate printing, flat screen, round screen, concave roller machine printing;
2, recommended use: 60 to 80 mesh mesh;
3, this product is not easy to plug the net, general direct printing can be (printed on the opposite side) suggested additives with 1.5%-2%N-305, the thicker the fabric printing more 2-3 times or more pulp, after printing, drying;
4, after printing, natural drying for 24 hours, if you need to bake, 140 to 150 degrees baking 2-3 minutes to achieve the best effect, the specific need to adjust according to the actual fabric. There is no need to overheat after 48 hours of natural drying after printing;
5, the production of large goods must be tested before the sample, to the plate sample as the standard.
