1100A/C high-density printing ink for hand printing

 

This product is the right angle thick plate printing glue developed by the company with imported materials according to the requirements of three-dimensional effect printing in the market, which solves the problems of not thick stack, not straight corner and too many printing times of three-dimensional thick plate printing.

 

1、 Performance: Performance

 

Appearance: 1100c is slightly micro yellow, 1100a is pure white;

 

1. Viscosity: 135000 ~ 145000cps;

 

2. Ionic: non-ionic;

 

3. Storage period: one year (normal temperature, sealed).

 

 

 

2、 Application: apply

 

1. This product is mainly used for three-dimensional thick plate printing of handbags, toys, clothing, webbing, etc. it has the advantages of good thickness, soft handle, no anti sticking, strong three-dimensional sense and easy color matching.

 

2. This product generally uses 80 mesh 120 mesh screen, according to the different patterns of the screen must be tight, this is quite key;

 

3. The product is not easy to plug the net. When it is too thick, it can be evenly diluted by adding a proper amount of water slurry;

 

4. In order to ensure the printing effect, it is generally required to print 5-8 times according to different thickness;

 

5. This product is easy to operate. It is generally recommended to directly use flat screen (ordinary screen) without making thick plate. When printing with thick plate screen, the second printing shall be carried out after the first printing is completely dry;

 

6. After natural air drying for 72 hours, over temperature 150 ℃ / 15-30 seconds, over temperature the fabric as far as possible;

 

7. In order to improve the fastness, 1% catalyst or cross-linking agent can be added.