H-105FX-AX Imitation Silicone HD printing ink(water-base)

1. APPEARANCE: H-105FX is slightly yellow, H-105AX is pure white; 

2. IONIC: non-ionic; 

3. Shelf Life: 6 months (normal temperature, sealed) .

 

APPLY: 

1, this product is mainly used for rubber band, swimwear cloth and other high elastic fabric three-dimensional thick printing, with strong elasticity, good fastness, good thickness, soft feel and so on. 

2, this product needs to add 1-2% of the auxiliary at the same time. 

3, this product generally uses 80 Mesh 120 mesh screen, pulling Mesh recommended, and the screen must be Taut; 

4, this product is not easy to plug the screen, too thick can be added to the right amount of water slurry mixing uniform dilution; 

5, in order to ensure the printing effect, it is usually printed 6 ~ 8 times according to its thickness. 

6. This product is easy to operate. After the first printing, it should be dried out before the second printing. 

7. After natural air drying for 48 hours, the temperature is about 100 degrees / 30 seconds, over-temperature will try to fabric over the opposite side (the specific temperature should be based on the fabric temperature and make appropriate adjustments) .