Products
- Printing ink for High Density series-Hand printing
- Printing ink for High Density series-Machine printing
- Printing ink for machine printing series
- Water-based printing ink
- Printing Material Auxiliaries series
- Printing ink for hand printing
- Dipping material for rope end webbing
Service hotline：
13827210351
current location：Home>>Products > Printing ink for High Density series-Hand printing > text
H-105F/A Waterborne Right Angle High Density Printing Ink
Product name: H-105F/A Waterborne Right Angle High Density Printing Ink
Brand: Milando
function: HD printing ink for hand printing
Feature Service: Free Sample
Packing Net weight: 5kg
Shelf Life: 12 months
by solvent type: water-based paint
H-105F/A Waterborne Right Angle High Density Printing Ink
Content introduction
Introduction: This product is developed by the company to meet the requirements of the market for three-dimensional printing with imported environmental-friendly elastic resins and auxiliaries.
Performance Characteristics:
1, appearance: H-105A is pure white, H-105F is slightly yellow.
2, VISCOSITY: 145000150000 CPS.
3. IONIC: NONIONIC.
4, storage period: One year (normal temperature, sealed)
Operation Instructions:
1, Application: Manual Plate Printing, water-based and oil-based scraper.
2, screen: 80 Mesh to 120 Mesh screen, according to the pattern to adjust the tension of the screen Mesh, Mesh screen to pull the screen (that is, Mesh and Philippines, Lin pattern pulled into a certain angle) to ensure that the printing does not sprout edge.
In operation can pad high screen, the General Standard for 5MM (Dowel or pad adhesive paper)
3, Printing: 1 backing: the first use of pure transparent pulp backing, according to thickness requirements to adjust the number of printing until the ideal thickness.
2 cover: adjust the proportion of transparent and white glue according to the pattern color.
General proportion: White: 20% transparent + 80% white glue, dark: 80% transparent + 20% white glue, light color: 50% transparent + 50% white glue.
General Thickness Standard: 6 Times (Mat screen frame) cover 2-3 times, the thickness of 1MM. Printing process: The first printing to dry out the second printing, after only table dry directly after printing.
Note: 1 This product is not easy to plug the net at room temperature, too thick when adding the right amount of pulp (pulp)3%-5% dilution, do not add water. For Improvement of fastness, 0.5%-1% catalyst (N-305-1 or crosslinker) can be added to the printing process.
After printing, dry naturally for 48 hours and then overheat (the opposite side of the printed fabric)150% for 15 seconds.
Do not overheat the front side of the printed fabric to prevent blistering.
Washing water standard: machine wash 60 degrees water temperature half an hour once, three times continuously, do not drop the size, do not fade.
5 production of large goods must first test proofing, proofing as a standard.
APPLICABLE SCOPE: Manual Screen Printing: suitable for handbag, toy, canvas, cotton, cotton, linen, blended, hoodie and other fabrics printing.
