H-104F/A 3D high density hand-printing ink(clear/white)

This product is a rectangular thick plate printing developed by the company according to the requirements of three-dimensional printing in the market with imported environmental protection elastic resin and additives, which solves the problem of too many times of three-dimensional thick plate printing. It has the characteristics of soft hand, fast thickening, easy color matching and good fastness.

 

 

1. Appearance: h-104a is pure white, h-104f is slightly micro yellow.

2. Viscosity: 145000 ~ 150000 CPS.

3. Ionic: non-ionic.

4. Storage period: one year (normal temperature, sealed)

 

 

1. Application: manual printing, water and oil scraper.

2. Screen: 80 mesh to 120 mesh screen, according to the pattern to adjust the tension of the screen, the screen needs to pull the inclined screen (that is, the screen and the film pattern are drawn at a certain angle) to ensure that there is no budding edge in the printing. During operation, the screen plate can be padded high, and the general standard is 5mm (net nailing or rubber pad)

3. Printing: ① bottoming: first, use pure transparent paste to bottoming, and adjust the printing times according to the thickness requirements until the desired thickness is achieved. ② Cover: adjust the proportion of transparent and white glue according to the pattern color. General proportion: White: 20% transparent + 80% white glue, dark: 80% transparent + 20% white glue, light: 50% transparent + 50% white glue. General thickness standard: base 6 times (mat net frame) cover 2-3 times, thickness of 1mm. In the printing process: the first printing needs to be completely dry and then printed for the second time. After that, it only needs to be directly printed after the surface is dry.

 

4、 Precautions:

① This product is not easy to plug the net under normal temperature. When it is too thick, add 3% - 5% of bond slurry (water slurry) to dilute. Do not add water. ② In order to improve the fastness, 0.5% - 1% catalyst (n-305-1) or crosslinker can be added to the printing process. ③ After 48 hours of natural drying after printing, it must be overheated (the reverse side of the printed fabric) 150% for 15 seconds. Do not overheat the front side of the printed fabric to prevent foaming. ④ Washing water standard: Machine wash once every half an hour at 60 ℃, three times in a row, without dropping pulp or color. ⑤ Production of large goods must first test proofing, proofing as the standard.

 

5、 Scope of application:

Manual screen printing: it is suitable for the printing of knitted cotton cloth, bags, handbags, toys, canvas, pure cotton, cotton and hemp, blended fabrics, sanitary clothing and other fabrics.