Imitation Drawing Paste Y-119FA/FC

Y-119FA/FC Imitation Drawing White Paste/Imitation Drawing Color Paste
This product can be directly printed on the surface of fabrics, the paste can penetrate into the bottom layer of fabrics, there is no film phenomenon on the surface, good air permeability, strong covering power, good whiteness, dry feel, environmental protection and no odor. It is suitable for printing on circular mesh machine, flat mesh machine, elliptical machine and other machines and manual printing.
Performance:
1. Imitation drawing paste is not affected by the operating conditions, stable, easy to control the color difference, easy curing.
2. The printing effect of the imitation drawing pulp is close to the drawing and dyeing, slightly hard feel, good fastness and covering, not subject to the limitations of the composition of fabrics and dyes, especially suitable for light-colored fabrics printing.
3. Safe to use, without the odor of conventional printing.
4. Good transmittance, can be used for dot printing within 300 mesh, the printing effect is similar to digital printing.
ApplicationApply:
1. imitation drawing white pulp directly add water-based color paste (not more than 5%), mix well to print, when the need for darker colors, such as: red, black, navy blue, etc., you can use the imitation drawing color paste color mixing to ensure that the feel of the printing and color vividness.
2. Mesh 100-300 mesh, the number of mesh for different pastes varies.
3. Self-drying over temperature 150℃/2-3 minutes.
4. This product is mainly applied to the printing of knitted cotton fabrics, when printing chemical fiber fabrics, it is necessary to add a certain proportion of color-fixing agent to ensure fastness.